For some reason the clock of my inverter is off by about 15 minutes. I have set the option to sync time between computer and inverter, but it does not sync the time.
Because of this, the vwPvodata view is populated with the V6 value only 15 minutes after it has been uploaded to PVOutput, thus V6 is never uploaded.
I am using version 3.0.3; I have tried the sync time option on and off, time source computer (in my case a Raspberry Pi) and inverter; all to no avail.
Please do note that the simplest solution is to set both clocks to within 5 minutes of each other by hand. I just wanted to make this comment because I noticed the option "sync time" did not perform as one would suppose it should.
Setting the clock on the inverter supposedly can be done with "Sunny Explorer" (PC software); setting the computer time is trivial but it is overridden by ntpd once every x hours.
Regardless of this minor bug, you made a great piece of software!
Comments: Fixed in 3.1.5
Because of this, the vwPvodata view is populated with the V6 value only 15 minutes after it has been uploaded to PVOutput, thus V6 is never uploaded.
I am using version 3.0.3; I have tried the sync time option on and off, time source computer (in my case a Raspberry Pi) and inverter; all to no avail.
Please do note that the simplest solution is to set both clocks to within 5 minutes of each other by hand. I just wanted to make this comment because I noticed the option "sync time" did not perform as one would suppose it should.
Setting the clock on the inverter supposedly can be done with "Sunny Explorer" (PC software); setting the computer time is trivial but it is overridden by ntpd once every x hours.
Regardless of this minor bug, you made a great piece of software!
Comments: Fixed in 3.1.5