Using SBFspot3.07
In the logfile I get an error 400 back from PVoutput (more than 12Kwh)
[10:33:44] ERROR: Uploading 38 datapoints, starting with 20150503,06:25,3275355,0 Bad request 400: Power value [2147483647] too high for system size [1755]
At this moment first config SMA system give this 400 error.
Second config SMA uploading fine to PVoutput
See also https://sbfspot.codeplex.com/discussions/636152
Comments: Hi, I'm facing the same problem (around once a week/every 3-4 Days). It looks like it happens always when there is very little solar power. I use a PI with SBFSpot 3.1.5 (also tried 3.1.2) and a SMA SB1300. Before the upgrade I used SBFSpot 2.x and it was working fine. Currently there is one dataset with a high value in my SQLiteDB, which I will keep in case you will request for the dbfile. Normaly I use a DB-Browser to change the wrong value to "0" and the upload is fine again. Br Christian
In the logfile I get an error 400 back from PVoutput (more than 12Kwh)
[10:33:44] ERROR: Uploading 38 datapoints, starting with 20150503,06:25,3275355,0 Bad request 400: Power value [2147483647] too high for system size [1755]
At this moment first config SMA system give this 400 error.
Second config SMA uploading fine to PVoutput
See also https://sbfspot.codeplex.com/discussions/636152
Comments: Hi, I'm facing the same problem (around once a week/every 3-4 Days). It looks like it happens always when there is very little solar power. I use a PI with SBFSpot 3.1.5 (also tried 3.1.2) and a SMA SB1300. Before the upgrade I used SBFSpot 2.x and it was working fine. Currently there is one dataset with a high value in my SQLiteDB, which I will keep in case you will request for the dbfile. Normaly I use a DB-Browser to change the wrong value to "0" and the upload is fine again. Br Christian