Hi,
I installed SBFspot last summer on rpi and worked perfectly. On the same rpi is running domoticz too. Two weeks ago I bought a smappee device and wanted to connect it to domoticz. After following these instruction https://www.domoticz.com/wiki/Smappee I noticed that SBFspot.sh was running properly but not the upload daemon. I tried to reinstall both SBFspot and upload daemon but did not work as well, so I restored a SD backup. Yesterday I tried again to partial instruction for smappee (not all); in particular:
1. I run these commands:
1.1 sudo apt-get update
1.2 sudo apt-get upgrade
1.3 sudo reboot
1.4 sudo apt-get install lua5.2 git-core
2. I downloaded these two files from http://www.domoticz.com/forum/viewtopic.php?f=21&t=7279:
2.1 usrlocalsharelua52.tar.gz
2.2 usrlocalliblua52.tar.gz
3. I run these commands:
3.1 sudo mkdir -p /usr/local/share/lua/5.2/
3.2 cd /usr/local/share/lua/5.2/
3.3 sudo tar -xvf ~/temp/usrlocalsharelua52.tar.gz
3.4 sudo mkdir -p /usr/local/lib/lua/5.2/
3.5 cd /usr/local/lib/lua/5.2/
3.6 sudo tar -xvf ~/temp/usrlocalliblua52.tar.gz
I think the above didn't interfere with SBFspot at all;
4. then I applied below commands (as stated here http://www.domoticz.com/wiki/Setting_up_a_RAM_drive_on_Raspberry_Pi):
4.1 sudo nano /etc/fstab
4.2 tmpfs /var/tmp tmpfs nodev,nosuid,size=1M 0 0
4.3 sudo mount -a
4.4 df
then I stopped here and again the SBFspot (download from inverter) worked properly but upload daemon not.
Has anyone idea what's wrong?
thanks and ciao,
gabriele
Comments: thanks for the interest in my trouble. Daemon was running/configured properly prior to above implementations. Once I notice the trouble I restored the SD card with the backup I made just before the above implementations. Now both SBFspot and daemon are properly running as I never did the above, but of course I would like to implement the above. I attach the daemon log file from the backup of SBFfolder I've made just before the recover of the SD (so after the trouble): I don't remember exactly but I suppose that I implemented the above before 19:45 (3th of march). If this log is not enough for you I can run again the above implementations; just tell me what I have to additionally do (while doing these implementations) in order to let you understand the issue. Many thanks and ciao, gabriele
I installed SBFspot last summer on rpi and worked perfectly. On the same rpi is running domoticz too. Two weeks ago I bought a smappee device and wanted to connect it to domoticz. After following these instruction https://www.domoticz.com/wiki/Smappee I noticed that SBFspot.sh was running properly but not the upload daemon. I tried to reinstall both SBFspot and upload daemon but did not work as well, so I restored a SD backup. Yesterday I tried again to partial instruction for smappee (not all); in particular:
1. I run these commands:
1.1 sudo apt-get update
1.2 sudo apt-get upgrade
1.3 sudo reboot
1.4 sudo apt-get install lua5.2 git-core
2. I downloaded these two files from http://www.domoticz.com/forum/viewtopic.php?f=21&t=7279:
2.1 usrlocalsharelua52.tar.gz
2.2 usrlocalliblua52.tar.gz
3. I run these commands:
3.1 sudo mkdir -p /usr/local/share/lua/5.2/
3.2 cd /usr/local/share/lua/5.2/
3.3 sudo tar -xvf ~/temp/usrlocalsharelua52.tar.gz
3.4 sudo mkdir -p /usr/local/lib/lua/5.2/
3.5 cd /usr/local/lib/lua/5.2/
3.6 sudo tar -xvf ~/temp/usrlocalliblua52.tar.gz
I think the above didn't interfere with SBFspot at all;
4. then I applied below commands (as stated here http://www.domoticz.com/wiki/Setting_up_a_RAM_drive_on_Raspberry_Pi):
4.1 sudo nano /etc/fstab
4.2 tmpfs /var/tmp tmpfs nodev,nosuid,size=1M 0 0
4.3 sudo mount -a
4.4 df
then I stopped here and again the SBFspot (download from inverter) worked properly but upload daemon not.
Has anyone idea what's wrong?
thanks and ciao,
gabriele
Comments: thanks for the interest in my trouble. Daemon was running/configured properly prior to above implementations. Once I notice the trouble I restored the SD card with the backup I made just before the above implementations. Now both SBFspot and daemon are properly running as I never did the above, but of course I would like to implement the above. I attach the daemon log file from the backup of SBFfolder I've made just before the recover of the SD (so after the trouble): I don't remember exactly but I suppose that I implemented the above before 19:45 (3th of march). If this log is not enough for you I can run again the above implementations; just tell me what I have to additionally do (while doing these implementations) in order to let you understand the issue. Many thanks and ciao, gabriele