Commented Feature: Using SBFspot to read data from SMA Energy Meter [44]
Feature request:enable SBFspot to read data from the SMA Energy Meter. Protocoll is documented at [EB-Systeme.de](http://www.eb-systeme.de/?page_id=1240). Site is unfortunatelly in German, if you need...
View ArticleClosed Unassigned: SBFspotUploadDeamon 3.1.1 gives error message [129]
After compilation of SBFspot 3.1.1 on my Rasberry Pi I started this version with both the applications.SBFspot works OK, however SBFspotUploadDeamon give the following error: ERROR: addBatchStatus()...
View ArticleClosed Unassigned: donation status changes 'lost' in v3.1.1 [131]
Hallo,I just started using SBFspot v3.1.1.Unfortunately, when getting the system data from pvoutput.org,batch_datelimit and batch_statuslimit get overwritten with the already stored values,i.e. the...
View ArticleCreated Issue: 123Solar: There is no data to export! [133]
Copied from https://sbfspot.codeplex.com/discussions/644444when I call:```/usr/local/bin/sbfspot.3/SBFspot -finq -q -123s=DATA -cfg/var/www/123solar/config/SBFspot_0.cfg -nosql```Output:>...
View ArticleClosed Issue: 123Solar: There is no data to export! [133]
Copied from https://sbfspot.codeplex.com/discussions/644444when I call:```/usr/local/bin/sbfspot.3/SBFspot -finq -q -123s=DATA -cfg/var/www/123solar/config/SBFspot_0.cfg -nosql```Output:>...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCommented Unassigned: workaround for: Power value too high for system size [132]
Hello,I recently started using SBFspot, version 3.1.1 on raspberry pi.I tried to get all archived data from the SMA inverter,and then upload it to pvoutput.org.I used the -ad and -ae flags too fetch...
View ArticleCreated Unassigned: multi-inverter [134]
Hello, I recently started using SBFspot, version 3.1.1 on raspberry pi. I have a two inverter system. Both are successfully being queried.As both inverters are part of my single PVOutput system, I...
View ArticleCommented Unassigned: multi-inverter [134]
Hello, I recently started using SBFspot, version 3.1.1 on raspberry pi. I have a two inverter system. Both are successfully being queried.As both inverters are part of my single PVOutput system, I...
View ArticleCommented Unassigned: multi-inverter [134]
Hello, I recently started using SBFspot, version 3.1.1 on raspberry pi. I have a two inverter system. Both are successfully being queried.As both inverters are part of my single PVOutput system, I...
View ArticleCommented Unassigned: multi-inverter [134]
Hello, I recently started using SBFspot, version 3.1.1 on raspberry pi. I have a two inverter system. Both are successfully being queried.As both inverters are part of my single PVOutput system, I...
View ArticleClosed Unassigned: multi-inverter [134]
Hello, I recently started using SBFspot, version 3.1.1 on raspberry pi. I have a two inverter system. Both are successfully being queried.As both inverters are part of my single PVOutput system, I...
View Article